سمة XStore
Menu Categories
العودة إلى الصفحة السابقة
تحسينات iKAGOO المخصصة للسيارات

لوحات العدادات الرقمية ووحدات التحكم الرئيسية التي تعمل بنظام أندرويد على غرار تصاميم الشركات المصنعة الأصلية

أنت لا تختار الأجهزة فحسب، بل تختار أيضًا الدعم الذي يوفره هذا الجهاز.

اطلب المنتج مباشرةً عبر الإنترنت. إذا كانت هناك حاجة إلى تفاصيل إضافية عن السيارة، فستتصل بك iKAGOO قبل الشحن. ويظل طلبك مرتبطًا بإرشادات التثبيت، وحل المشكلات، وإرشادات البرامج، والمساعدة في توفير قطع الغيار، وتنسيق الإصلاحات. لماذا تختلف الأسعار →

يشمل ضمانًا على الأجهزة لمدة 12 شهرًا. ويظل الدعم متاحًا بعد انتهاء فترة الضمان؛ وقد تُفرض رسوم على قطع الغيار غير المشمولة بالضمان أو تكاليف الشحن أو الإصلاح.

عرض
لوحات العدادات الرقمية من سكودا

Octavia A5 and A7 digital-cluster upgrades use different vehicle platforms

The current iKAGOO Skoda digital-cluster route covers Octavia A5 and A7 applications from 2004–2020. A5 2004–2013 uses the earlier PQ35 route, while A7 / 5E 2013–2020 uses MQB architecture. The correct 10.25-inch cluster depends on the exact generation, trim, original cluster, connector route and factory vehicle information.

A5 VS A7 FITMENT

Do not select the Octavia cluster from the year alone

Octavia A5 2004–2013 · PQ35Earlier vehicle architecture with its own cluster, connector and CANBUS route. The original instrument layout should be checked before shipment.
Octavia A7 / 5E 2013–2020 · MQBLater MQB architecture requiring the matching cluster route. RS and other trim variations should be confirmed from the actual vehicle.

10.25-inch digital dash with vehicle-data integration

The current Skoda route uses a 10.25-inch IPS LCD with 1920×720 resolution, 60 Hz refresh rate and CANBUS integration. Supported speed, RPM, fuel, mileage, trip information, warnings and steering-wheel controls depend on correct matching and setup. This is a digital instrument cluster, not an Android head unit, so CarPlay, Android Auto or navigation display should only be claimed where the vehicle, head unit and cluster integration route support them.

Skoda Octavia digital instrument cluster installed example
Skoda Octavia digital-cluster reference: confirm the original A5/PQ35 or A7/5E MQB dashboard route before ordering.

ما الذي يجب تأكيده قبل الشحن؟

Exact generationConfirm A5/PQ35 or A7/5E/MQB, not only “Octavia.”
صورة المجموعة أثناء التشغيلShow the original dials, information display and warning area.
Trim & required functionsDeclare RS or other trim differences and the factory data you need to retain.
التعديلات السابقةEarlier cluster swaps, coding or aftermarket electronics should be disclosed.
iKAGOO · ترقيات مخصصة لكل مركبة · دعم طويل الأمد

The right virtual cockpit starts with the correct VW Group platform

iKAGOO checks the Octavia generation and original cluster before shipment, then keeps the order as the reference for installation, configuration and troubleshooting. The intended route uses matched connectors without intentional cutting of supported factory wiring. Vehicle data, warnings and supported controls should be tested before final reassembly.

Platform reviewA5/PQ35 versus A7/5E/MQB is confirmed first.
مطابقة العدادOriginal layout, connector and retained information are checked.
التركيب والاختبارTest data, warnings and controls before final reassembly.
كفالة لمدة 1 سنةتظل مشكلات الأجهزة المؤهلة مشمولة بموجب سياسة iKAGOO الحالية.

Skoda Digital Instrument Clusters FAQ

Are Octavia A5 and A7 clusters interchangeable?

No. A5/PQ35 and A7/5E/MQB use different vehicle architectures and must be matched separately.

Is the 10.25-inch cluster an Android head unit?

No. It is a digital instrument cluster. Android, CarPlay and Android Auto are not automatic cluster features.

Will mileage and steering-wheel controls remain?

Supported vehicle data and controls depend on the matched platform and configuration. Confirm the exact vehicle before ordering.

What if I have an Octavia RS?

RS fitment can be trim-dependent. Send the exact year, platform and powered-on original-cluster photo before shipment.

Skoda digital cockpit resources